 |
|
|
|
|
| |
|
|
Rework Station for micro chip components Model SMR-402 |
 |
|
Micro Rework Station SMR-402 is
a manual rework station specially designed for rework of surface mount micro
chip components such as chip register and chip capacitor. The chip component
size of 0402mm(01005inch) or above can be handled by operating clamp type pick
and place unit. The system enables you to simply and accurately set the pick and
place position by viewing CCD camera image.
During reflow process with halogen heat beam, the pick and place unit remain
clamping the component to secure the position and prevent tombstone effect, as
well as to minimize heat stress to the adjacent components.
 See the introduction video |
 |
|
Standard
features
 Compact table top design.
Pick and place unit with unique clamp
mechanism (Patent pending).
Halogen spot heater for target chip
component.
Lockable X-Y handles for accurate component
alignment.
Ceramic bottom heater for preheating of PC
board.
Solder paste printing fixture for component
leads.
Touch panel for heater temperature and time
setting.
Built-in duct and fun for flux fume exhaust.
|
 |
|
|
| Chip component clamper for Pick and place |
|
Halogen heater for chip component reflow |
 |
Capability/Function |
| Max. board size |
220mm x 300mm |
| X-Y table movable range |
220 x 270mm |
| Head/Table operation |
Large manual handle
operation with fine adjustment |
| Chip clamper operation |
Up/down Lever,
Open/close knob |
| Max. profile number |
Max. 10 program |
| Heating step (zone) setting |
5 steps |
| Temperature sensor |
External x 1, Internal
x 1 |
| CCD Camera unit |
Color CCD (Approx. 40
times by 15inch monitor) |
| Utility requirement |
100-240VAC, 300VA, 50/60 Hz |
| Dimensions, weight |
W658mm x
D729mm x H446mmx, Approx. 48kg. |
|
|
Options |
| Chip Clampers, Metal stencils for solder paste printing. |
|
 |
|
